Duplex Pipe Fittings

  • Home /
  • Duplex Pipe Fittings

ASTM A815 UNS S31803 Elbow/ Tee and Duplex 2205 Pipe Fittings manufacturer in India

What is Duplex Pipe Fittings?
The Duplex Pipe Fittings can be seamless or welded in accordance to different standards like ANSI, ASME, and DIN. There are different types of Duplex Pipe Fittings available , and each comes with different structures and varied functions. The Duplex material has a lower percentage of alloying elements and that is why they are low in cost. However, it possesses higher yield strength when compared to any other austenitic steel. That is why, Duplex Pipe Fittings can be purchased with a lesser thickness, which also helps to save the overall cost.
The Duplex Pipe Fittings are widely used in applications like storage tanks, water heaters, bridges, etc. They do not have high machinability like the 300 series stainless steel. They are mainly used in environments where there are chances that the austenitic grades might have premature failures. They can resist the salt water environment better than the grade 316. It is a nitrogen enhanced stainless steel which is designed to combat the corrosion resistance issues faced by the 300 series stainless steel.

Duplex 2205 Socket Weld Fittings Vs DIN 1.4462 Threaded Fittings
The Duplex 2205 Socket Weld Fittings consists of a socket and the pipe is inserted through that. It is most used with smaller pipe diameters, having NPS 2 or lesser. It offers high leakage integrity and great structural strength.
The DIN 1.4462 Threaded Fittings are traditional ways of pipe connection where interna; amd external threads are used. Their dimensions are mostly less than or equal to 4 inches.It does not involve welding, and hence the pipes can be assembled or disassembled easily.

ASTM A403 UNS S31803 Elbow Vs Duplex Eccentric Reducer
The ASTM A403 UNS S31803 Elbow is used to change the flow direction or flow angle of the pipe run. They are available with 90 degrees and 45 degrees turns. Also, there are two types of elbow pipe fittings, namely long radius and short radius. The difference between them lies in their radius of curvature.
The reducer fitting helps to change the bore size from a larger to a smaller pipe. The Duplex Eccentric Reducer is a type of reducer pipe fitting which is primarily used on that side of the pump where the suction occurs. It helps in ensuring that the air does not get accumulated inside the pipe. They help in maintaining the same top or bottom level of the pipe and thus are used for vertical applications.

Duplex Steel 2205 Tee Vs Duplex 2205 End cap
The Duplex Steel 2205 Tee is a T-shaped pipe fittings that consists of two outlets and one main pipe connection. The outlets are at 90 degrees each to the main connection lines. It mainly helps to combine or divide the flow. It also helps to change the flow direction and adjust the flow rate inside the pipeline.
The Duplex 2205 End cap is a pipe fitting that helps to cover the ends of the pipe and protect it. They are customized according to the shape and dimensions of the pipeline. They are to end the connection, or when maintenance or repair works are required inside the pipelines.

How do you attach an Alloy 2205 Stub End to a Pipe?
The Alloy 2205 Stub End to a Pipe works together with a lap joint flange to effectively reduce the maintenance cost. The stub end with same thickness and bore size, is welded to the pipe to form the connection. The lap joint flange can remain free and rotate on the pipe, which helps in simplifying the mating flange’s bore holes. This helps to make the whole installation process much easier.

Duplex Pipe Fittings

Duplex Pipe Fittings

European Directive 2014/68/eu certified Manufacturer of 1.4462 Fittings, Duplex Coupling, and ASTM A815 UNS S32205 Tee Mumbai is capable of distributing in excess of 1000 tonnes per annum

Table of Content


Duplex Pipe Fittings Specifications ASTM A815
Duplex 2205 Pipe Fittings Sizes Duplex Stainless Steel Seamless Fittings: 1/2" - 10"
ASME B16 9 Dss UNS S31803 Welded Fittings: 1/2" - 48"
S32205 DSS Pipe Fittings Dimensions ASME B16.28, ASME/ANSI B16.9, BS4504, MSS-SP-43, BS1560, BS4504, BS10
Duplex Pipe Fittings Thickness SCH30, SCH10, SCH 160, SCH20, SCH60, XS, STD SCH40, SCH 80, SCH 120, SCH 140, SCH 100, XXS available with NACE MR 01-75
DSS Buttweld Fittings Type Manufacturer DN15-DN1200
Duplex Steel Fittings Connection Welding
Bending Radius Provided By Manufacturer R=1D, 3D, 2D, 5D, 8D, 6D, 10D or Custom Duplex Pipe Fittings
Size Range ½" NB to 24" NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100) DSS Buttweld Fittings
Duplex 2205 Elbow Manufacturer Angle : 22.5 deg, 45 deg, 30deg, 90 deg, 1.0D, 180 deg, 1.5D, 3D, 2.5D, 2.0D, 4D, 6D, 5D, 7D-40D .
Standard: ASME B16.28, GB, ASME B16.9, MSS SP-75 JISB2311 DIN2605 JISB2312 JISB2313, ASME B16.25, BS, ISO
Duplex 2205 Fittings Manufacturing process Push, Forge, Press, Cast, etc.
ASME B16.9 DSS Pipe Fittings Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Duplex Fittings Origin & Mills European, Japanese, USA, Korean, Ukraine, Indian, Russian
Specialized Duplex Pipe Fittings Manufacturer of Alloy 2205 Stub End, 90º Elbows, Tees, Pipe Cap, Crosses, 45º Elbows, Reducers, Pipe Bend
Application of Industrial Duplex Pipe Fittings
  • Fittings To Connect Tubes and Pipe in Gas, Petroleum, Metallurgy, Chemical, Power, Construction, Shipbuilding etc
DSS 2205 Threaded Fittings Thread Provided By Manufacturer BSPT, NPT, BSPP
Stainless Steel 2205 Forged Fittings Pressure Rating Threaded end - 3000lb/ 2000lb/ 6000lbs
Socket weld end- 6000/ 3000/ 9000lbs
Dimension Specification MSS SP-79, 95, 83, 97, BS 3799, ASME 16.11
Duplex 2205 Socket Weld Fittings Manufacturer Half Coupling, Union, Tee, Cross, Coupling, Cap, Outlet, Welding Outlet, Boss, Insert

Are you looking for ASTM A403 Duplex 2205 Fittings dealers, stockholders, wholesalers, supplier, importer, stockists, distributor, exporters and Manufacturer in Mumbai.

WERKSTOFF NR. 1.4462 Forged Equal Tee

WERKSTOFF NR. 1.4462 Forged Equal Tee

Duplex Stainless Steel Forged Elbow

Duplex Stainless Steel Forged Elbow

ASTM A182 UNS S31803 Coupling

ASTM A182 UNS S31803 Coupling

ASME B16.11 A182 Duplex 2205 Socket Weld Elbow

ASME B16.11 A182 Duplex 2205 Socket Weld Elbow

DIN 1.4462 SW Tee

DIN 1.4462 SW Tee

Duplex Steel Socket Weld Half Coupling

Duplex Steel Socket Weld Half Coupling

Duplex Steel 2205 Threaded Elbow

Duplex Steel 2205 Threaded Elbow

Duplex Stainless Steel 2205 Threaded Reducing Tee

Duplex Stainless Steel 2205 Threaded Reducing Tee

Alloy 2205 Threaded Coupling

Alloy 2205 Threaded Coupling

Manufacturer of 1.4462 Duplex Steel Elbow (DIN 2605), ASTM A815 S31803 Reducer (DIN 2616), UNS S32205 Tee (DIN 2615), DSS End Cap (sim. to DIN 2617/28011), Duplex 2205 Collars (sim. to DIN 2642), Alloy 2205 Saddles (DIN 2618), and Brench Bends (made from Elbow type 3/90°).

DSS Fittings Price Per Piece in India Price Applicable for jan 2022 to june 2022 Price Applicable for July 2022 to December 2022
DN50 SCH 40 DSS 2205 elbow Per Piece US $2.5 US $4.5
S31803 90 DEG LR ELBOW Per Piece US $3 US $5

Check our price with other Duplex Pipe Fittings Manufacturer in India Before Purchasing. This is an approximate Price of DSS Fittings in India. Feel free to contact us latest Stocklist of UNS S31803 Buttweld Fittings in Mumbai.

Normal Size Of Pipe
(inches)		 Pipe Sch OD (inch)
 Wall
Thick.
(inch)
 Temperature (oF)
100 200 300 400 500 600 650 700 750
Allowable Stress (psi)
16700 16700 16700 15500 14400 13500 13200 12900 12600
1" 40 1.315 0.133 2205 2205 2205 2047 1902 1783 1743 1703 1664
80 1.315 0.179 3061 3061 3061 2841 2640 2475 2420 2365 2310
160 1.315 0.250 4493 4493 4493 4170 3874 3632 3552 3471 3390
1 1/2" 40 1.900 0.145 1629 1629 1629 1512 1404 1317 1287 1258 1229
80 1.900 0.200 2303 2303 2303 2138 1986 1862 1821 1779 1738
160 1.900 0.281 3362 3362 3362 3120 2899 2717 2657 2597 2536
2" 40 2.375 0.154 1371 1371 1371 1272 1182 1108 1083 1059 1034
80 2.375 0.218 1985 1985 1985 1843 1712 1605 1569 1534 1498
160 2.375 0.344 3283 3283 3283 3047 2831 2654 2595 2536 2477
3" 40 3.500 0.216 1301 1301 1301 1208 1122 1052 1028 1005 982
80 3.500 0.300 1844 1844 1844 1712 1590 1491 1458 1425 1391
160 3.500 0.438 2787 2787 2787 2587 2403 2253 2203 2153 2103
4" 40 4.500 0.237 1102 1102 1102 1023 950 891 871 851 831
80 4.500 0.337 1596 1596 1596 1482 1377 1291 1262 1233 1204
160 4.500 0.531 2611 2611 2611 2424 2552 2111 2064 2017 1970
5" 40 5.563 0.258 965 965 965 896 832 780 763 746 728
80 5.563 0.375 1428 1428 1428 1325 1231 1154 1129 1103 1077
160 5.563 0.625 2474 2474 2474 2296 2133 2000 1955 1911 1866
6" 40 6.625 0.280 877 877 877 814 756 709 693 677 661
80 6.625 0.432 1379 1379 1379 1280 1189 1115 1090 1065 1040
160 6.625 0.719 2382 2382 2382 2211 2054 1925 1883 1840 1797
8" 40 8.625 0.322 771 771 771 716 665 623 610 596 582
80 8.625 0.500 1218 1218 1218 1131 1050 985 963 941 919
160 8.625 0.906 2298 2298 2298 2133 1982 1858 1817 1775 1734
10" 40 10.750 0.365 699 699 699 649 603 565 553 540 528
80 10.750 0.594 1159 1159 1159 1075 999 937 916 895 874
160 10.750 1.125 2289 2289 2289 2124 1974 1850 1809 1768 1727
Nominal Pipe Size Outside Diameter 90° Elbows 45° Elbows 180° Returns
(inches) Long Radius Short Radius Long Radius Long Radius
(mm) (inches) Center to Face
(inches)		 Center to Face
(inches)		 Center to Face
(inches)		 Radius
(inches)		 Center to Center
(inches)		 Back to face
(inches)
1/2 21.3 0.840 1 1/2 - 5/8 2 1 7/8
3/4 26.7 1.050 1 1/8 - 7/16 2 1/4 1 11/16
1 33.4 1.315 1 1/2 1 7/8 3 2 3/16
1 1/4 42.2 1.660 1 7/8 1 1/4 1 3 3/4 2 3/4
1 1/2 48.3 1.900 2 1/4 1 1/2 1 1/8 3 4 1/2 3 1/4
2 60.3 2.375 3 2 1 3/8 4 6 4 3/16
2 1/2 73.0 2.875 3 3/4 2 1/2 1 3/4 5 7 1/2 5 3/16
3 88.9 3.500 4 1/2 3 2 6 9 6 1/4
3 1/2 101.6 4.000 5 1/4 3 1/2 2 1/4 7 10 1/2 7 1/4
4 114.3 4.500 6 4 2 1/2 8 12 8 1/4
5 141.3 5.563 7 1/2 5 3 1/8 10 15 10 5/16
6 168.3 6.625 9 6 3 3/4 12 18 12 5/16
8 219.1 8.625 12 8 5 12 24 16 5/16
10 273.1 10.750 15 10 6 1/4 15 30 20 3/8
12 323.9 12.750 18 12 7 1/2 18 36 24 3/8

Class 2000, 3000 and 6000 Duplex Steel Forged Fittings and DSS 2205 Socket Weld Fittings according ASME B1.20.1

GRADE SCHEDULE NOM. PIPE SIZE
WP-S SCH 10S 1/2″ - 12″
  SCH 40S 1/2″ - 12″
  SCH 80S 1/2″ - 12″
S31803 / S32205 C N P Si Mn Mo Fe Cr S Ni
1.0 0.03 0.02 2.0 3.0 - 3.5 22.0 - 23.0 0.03 4.5 - 6.5 0.14 - 0.2 Bal
S31803 / S32205 Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
7.8 g/cm3 1350 °C (2460 °F) Psi - 80000 , MPa - 550 Psi - 116000 , MPa - 800 15 %
STANDARD UNS WERKSTOFF NR.
Duplex S31803 S31803 1.4462
Duplex S32205 S32205 1.4462
Duplex Stainless Steel Pipe Fittings manufacturer in India offers Alternating Current Field Measurement (ACFM) & Non Destructive Testing
Dss UNS S31803 90° Long Radius Elbow

Dss UNS S31803 90° Long Radius Elbow

15 NB SCH 100 Duplex 2205 90° Short Radius Elbow

15 NB SCH 100 Duplex 2205 90° Short Radius Elbow

UNS S31803 Duplex Stainless Steel 45° Long Radius Elbow

UNS S31803 Duplex Stainless Steel 45° Long Radius Elbow

ASTM A403 Duplex 2205 45° Short Radius Elbow

ASTM A403 Duplex 2205 45° Short Radius Elbow

Alloy 2205 180° Long Radius Elbow

Alloy 2205 180° Long Radius Elbow

450 NB SCH 40 Duplex Stainless Steel 180° Short Radius Elbow

450 NB SCH 40 Duplex Stainless Steel 180° Short Radius Elbow

Duplex Steel 1D Elbow

Duplex Steel 1D Elbow

SCH 10 Duplex Stainless Steel 2205 1.5D Elbow

SCH 10 Duplex Stainless Steel 2205 1.5D Elbow

Duplex Steel 2205 3D Elbow

Duplex Steel 2205 3D Elbow

SCH 20 DIN 1.4462 5D Elbow

SCH 20 DIN 1.4462 5D Elbow

Duplex 2205 UNS S31803 10D ELBOW

Duplex 2205 UNS S31803 10D ELBOW

Dss UNS S31803 Seamless Buttwelding 45° and 90° Elbows

Dss UNS S31803 Seamless Buttwelding 45° and 90° Elbows

SCH 30 UNS S31803 Duplex Stainless Steel Welded Elbows

SCH 30 UNS S31803 Duplex Stainless Steel Welded Elbows

WERKSTOFF NR. 1.4462 Seamless Buttwelding 180° Returns

WERKSTOFF NR. 1.4462 Seamless Buttwelding 180° Returns

SCH STD DIN 1.4462 Straight Tees and Crosses

SCH STD DIN 1.4462 Straight Tees and Crosses

Duplex 2205 UNS S31803 Reducing Outlet Tees and Reducing Outlet Crosses

Duplex 2205 UNS S31803 Reducing Outlet Tees and Reducing Outlet Crosses

Duplex 2205 Equal Tee

Duplex 2205 Equal Tee

SCH 60 Duplex Steel 2205 Reducing Tee

SCH 60 Duplex Steel 2205 Reducing Tee

Duplex Stainless Steel 2205 Equal Cross

Duplex Stainless Steel 2205 Equal Cross

SCH 80 Duplex Stainless Steel Reducing Cross

SCH 80 Duplex Stainless Steel Reducing Cross

ASTM A403 Duplex 2205 Reducers

ASTM A403 Duplex 2205 Reducers

Alloy 2205 Concentric Reducer

Alloy 2205 Concentric Reducer

SCH XS ASTM A815 UNS S31803 Eccentric Reducer

SCH XS ASTM A815 UNS S31803 Eccentric Reducer

Duplex Steel Stub End

Duplex Steel Stub End

Duplex 2205 UNS S31803 Lap Joint Stub Ends

Duplex 2205 UNS S31803 Lap Joint Stub Ends

Duplex Steel 2205 Long Stubend

Duplex Steel 2205 Long Stubend

WERKSTOFF NR. 1.4462 Short Stubend

WERKSTOFF NR. 1.4462 Short Stubend

SCH 120 DIN 1.4462 Pipe Cap

SCH 120 DIN 1.4462 Pipe Cap

Duplex 2205 End Cap

Duplex 2205 End Cap

SCH 140 Duplex Steel Collar

SCH 140 Duplex Steel Collar

ASTM A403 Duplex 2205 Swage Nipple

ASTM A403 Duplex 2205 Swage Nipple

SCH 160 ASTM A815 UNS S31803 Pipe Nipples

SCH 160 ASTM A815 UNS S31803 Pipe Nipples

Duplex Stainless Steel 2205 Barrel Nipple

Duplex Stainless Steel 2205 Barrel Nipple

SCH XXS UNS S31803 Duplex Stainless Steel Reducing Nipple

SCH XXS UNS S31803 Duplex Stainless Steel Reducing Nipple

Dss UNS S31803 Bend

Dss UNS S31803 Bend

Duplex Stainless Steel Long Radius Bend

Duplex Stainless Steel Long Radius Bend

Nominal
Pipe Size		Outside
Diameter		Reducers
Reduced from
(inches)		 (inches) (mm) Concentric & Eccentric Length
(inches)		 Reduced to
(inches)
1/20.84021.31 1/21/4
1 1/23/8
3/41.05026.723/8
21/2
11.31533.423/8
21/2
23/4
1 1/41.66042.221/2
23/4
21
1 1/21.90048.32 1/21/2
2 1/23/4
2 1/21
2 1/21 1/4
22.37560.333/4
31
31 1/4
31 1/2
2 1/22.87573.03 1/21
3 1/21 1/4
3 1/21 1/2
3 1/22
33.50088.93 1/21
3 1/21 1/2
3 1/22
3 1/22 1/2
3 1/24.000101.641 1/4
41 1/2
42
42 1/2
43
44.500114.341 1/2
42
42 1/2
43
43 1/2
55.563141.352
52 1/2
53
53 1/2
54
66.625168.35 1/22 1/2
5 1/23
5 1/23 1/2
5 1/24
5 1/25
88.625219.163
63 1/2
64
65
66
1010.750273.174
75
76
78
1212.750323.985
86
88
810
Manufacturer of Duplex Tube Fittings & 2205 Buttweld Fittings in SCH10 Duplex Steel Short Radius 90 Degree Elbow and UNS S32205 LR Elbow in Welded & Seamless type
Gauge Min Bend Radius
Includes Min Closeness of Cutout to Bend		 Bend Radius
(Refers to Inner Radius)
14 gauge (0.0075 | 1.09 mm).0275.005, .0055, .0062, .007, .0075
.0375.007, .0105
.05.009, .011, .0115, .012
1.0375.04
22 gauge (0.0029 | 0.074 mm).02.005
11 gauge (0.0120 |3.005mm).05.007, .008, .009, .01, .0125
.0265.005, .0055, .0075, .008
.0375.007
.05.0105, .012
18 gauge (0.0048 | 1.022 mm).02.004, .0045, .005
.0265.006, .007, .008, .0085
.0375.01, .0125
.05.0115, .012
16 gauge (0.0060 | 1.052 mm).02.0035, .005
.0265.006, .007
.0375.0095
20 gauge (0.0035 | 0.089 mm).02.005
.0265.004, .008
24 gauge (0.0024 | 0.061 mm).02.004
.0265.008
NPSKGLBS
1/20.160.35
3/40.20.45
10.340.75
1¼0.591.3
1½0.912
21.593.5
2½2.726
33.187
3½4.089
45.4412
59.5321
615.4234
824.9555
1038.5685
1254.43120
1474.84165
1688.45195
18112.94249
20155.13342
22187.79414
24239.5528
26349.27770
30480.811060
36675.851490
NPSKGLBS
1/20.110.25
3/40.110.25
10.230.5
1¼0.410.9
1½0.521.15
212.2
2½1.814
32.956.5
3½3.798.35
46.1213.5
59.9822
615.8835
832.2171
1048.53107
1272.57160
1492.99205
16125.19276
18154.22340
20190.51420
22235.87520
24272.16600
26330.67729
30442.25975
36640.471412
  • Beveled Ends
  • Threaded Ends (Male & Female)
  • Squared Ends
  • Cut Grooves
  • Victaulic Grooves
  • Flanged Ends
  • ASME B16.9 - Factory-Made Wrought Buttwelding Fittings
  • MSS SP-43 - Fabricated and Wrought Buttweld Fittings for Corrosion Resistant, Low Pressure Applications
2-1/2 Nb SCH 10 90° Duplex Steel 2205 Long Radius Elbow

2-1/2" Nb SCH 10 90° Duplex Steel 2205 Long Radius Elbow

2 Nb SCH 80 90° Duplex 2205 Elbow

2" Nb SCH 80 90° Duplex 2205 Elbow

4 Nb SCH 120 45° Alloy 2205 Long Radius Elbow

4" Nb SCH 120 45° Alloy 2205 Long Radius Elbow

1-1/4 X 1/2 Nb Sch160 Duplex 2205 Concentric Reducer

1-1/4" X 1/2" Nb Sch160 Duplex 2205 Concentric Reducer

1 X 1/2 Nb Sch60 Duplex 2205 UNS S31803 Eccentric Reducer

1" X 1/2" Nb Sch60 Duplex 2205 UNS S31803 Eccentric Reducer

2 X 1/2 Nb Sch20 Duplex Stainless Steel Concentric Reducer

2" X 1/2" Nb Sch20 Duplex Stainless Steel Concentric Reducer

6 Nb SCH 30 ASTM A815 UNS S31803 Tee

6" Nb SCH 30 ASTM A815 UNS S31803 Tee

1-1/4 X 1 Nb SCH 100 UNS S31803 Duplex Stainless Steel Reducing Tee

1-1/4" X 1" Nb SCH 100 UNS S31803 Duplex Stainless Steel Reducing Tee

3 Nb SCH 80 Equal Dss UNS S31803 Tee

3" Nb SCH 80 Equal Dss UNS S31803 Tee

Outside Diameter
at Bevel (D)		1.061.06+ 1.06
- 0.08		+ 2.04
- 1.06
Center to End LR (A/B)2222
Nominal Pipe Size43 to 3½1/2 to 2½5 to 8
Outside Diameter
at Bevel (D)		+ 6.04
- 4.08		+ 6.04
- 4.08		+ 4
- 3.02		+ 6.04
- 4.08
Nominal Pipe Size26 to 3020 to 2410 to 1832 to 48
Inside Diameter at End+ 6.04
- 4.08		4.083.02+ 6.04
- 4.08
Center to End 3D (A/B)6336
Inside Diameter at End1.061.060.081.06
Center to End LR (A/B)3225
Center to End 3D (A/B)3333
  • Micro and Macro Test
  • Pitting Resistance Test
  • Flattening Test
  • Hardness Test
  • Flaring Test
  • PMI Testing
  • Industrial Boilers
  • Power Plants
  • Oil & Gas Industry
  • Ship Building
  • Nuclear Power
  • Paper & Pulp
  • Refineries
  • Marine Applications
  • Fossil Fuel Power Plants
Nominal  pipe size Sch.0* Dimensions in mm Weight
in.0DtE kg/pce
1/210s
40s
80s		21.03
21.03
21.03		2.011
2.077
3.073		25.04
25.04
25.04		0.0040
0.0050
0.0050
3/410s
40s
80s		26.07
26.07
26.07		2.011
2.087
3.091		25.04
25.04
25.04		0.0050
0.0060
0.0060
110s
40s
80s		33.04
33.04
33.04		2.077
3.038
4.055		38.01
38.01
38.01		0.0090
0.0130
0.0130
1¼10s
40s
80s		42.02
42.02
42.02		2.077
3.056
4.085		38.01
38.01
38.01		0.0130
0.0170
0.0180
1½10s
40s
80s		48.03
48.03
48.03		2.077
3.068
5.008		38.01
38.01
38.01		0.0140
0.0230
0.0240
210s
40s
80s		60.03
60.03
60.03		2.077
3.091
5.054		38.01
38.01
38.01		0.0170
0.0270
0.0340
2½10s
40s
80s		73.00
73.00
73.00		3.005
5.016
7.001		38.01
38.01
38.01		0.0250
0.0450
0.0510
310s
40s
80s		88.09
88.09
88.09		3.005
5.049
7.062		50.08
50.08
50.08		0.0400
0.0710
0.0850
410s
40s
80s		114.03
114.03
114.03		3.005
6.002
8.056		63.05
63.05
63.05		0.0650
1.0220
1.0610
510s
40s
80s		141.03
141.03
141.03		3.040
6.055
9.053		76.02
76.02
76.02		1.0020
1.0910
2.0550
610s
40s
80s		168.03
168.03
168.03		3.040
7.011
10.097		88.09
88.09
88.09		1.0360
3.0230
4.0540
810s
40s		219.01
219.01		3.076
8.018		101.06
101.06		2.0490
5.0670
1010s
40s		273.01
273.01		4.019
9.027		127.00
127.00		4.0900
9.0210
1210s
40s		323.09
323.09		4.057
9.053		152.04
152.04		6.0530
13.0060
1410s
STD		355.06
355.06		4.078
9.053		165.01
165.01		8.0160
15.0900
1610s
STD		406.04
406.04		4.078
9.053		177.08
177.08		14.0510
20.0000
1810s457.024.078203.0217.0960
2010s508.005.054228.0627.0220
2410s609.066.035266.0734.0470
Nominal  pipe size Sch.0* Dimensions in mm
Weight
in.0DtGFR.0 max.0 kg/pce
1/210s
40s		21.03
21.03		2.011
2.077		34.09
34.09		50.08
50.08		3.018
3.018		0.0070
0.0090
3/410s
40s		26.07
26.07		2.011
2.087		42.09
42.09		50.08
50.08		3.018
3.018		0.0100
0.0120
110s
40s		33.04
33.04		2.077
3.038		50.08
50.08		50.08
50.08		3.018
3.018		0.0160
0.0170
1 ¼10s
40s		42.02
42.02		2.077
3.056		63.05
63.05		50.08
50.08		4.076
4.076		0.0220
0.0250
1 ½10s
40s		48.03
48.03		2.077
3.068		73.00
73.00		50.08
50.08		6.035
6.035		0.0250
0.0310
210s
40s		60.03
60.03		2.077
3.091		92.01
92.01		63.05
63.05		7.094
7.094		0.0430
0.0610
2 ½10s
40s		73.00
73.00		3.005
5.016		104.08
104.08		63.05
63.05		7.094
7.094		0.0570
0.0800
310s
40s		88.09
88.09		3.005
5.049		127.00
127.00		63.05
63.05		9.053
9.053		0.0730
1.0130
410s
40s		114.03
114.03		3.005
6.002		157.02
157.02		76.02
76.02		11.011
11.011		1.0090
1.0870
510s
40s		141.03
141.03		3.040
6.055		185.07
185.07		76.02
76.02		11.011
11.011		1.0470
2.0280
610s
40s		168.03
168.03		3.040
7.011		215.09
215.09		88.09
88.09		12.070
12.070		2.0150
3.0570
810s
40s		219.01
219.01		3.076
8.018		269.09
269.09		101.06
101.06		12.070
12.070		3.0220
6.0070

Do You Belong To Following Places Check What We Supply Here

Duplex Stainless Steel 2205 Tee

Duplex Stainless Steel 2205 Tee

Poland, South Korea, Kuala Lumpur, Tehran -Iran, Qatar, Dubai, Indonesia, United States

Duplex 2205 Uns S31803 Stub End

Duplex 2205 Uns S31803 Stub End

Iran, Singapore, Romania Netherlands, Malaysia, Dubai- UAE, Jakarta -Indonesia, France

ASME SA 815 Duplex End cap

ASME SA 815 UNS S31803 End cap

Nigeria, Germany, Vietnam, Kuwait, Czechia, South Africa, Malaysia, Norway, Belgium, Chile, Europe

Duplex Ss 2205 Buttweld Fittings

SS 2205 Buttweld Fittings

Istanbul- Turkey, Hong Kong, Argentina, Bangladesh, Bahrain, Jakarta, Finland, Oman, Brazil, NY 12203 (USA)

2205 Duplex Stainless Steel Fittings

2205 DSS Fittings

USA, Japan, Malaysia, Thailand, States, Saudi Arabia (KSA), United Kingdom (UK), Spain, Ellington -United

2205 Uns S31803 Weld Fittings

2205 Uns S31803 Weld Fittings

Canada, Greece, Singapore, Los Alamos -Mexico, Philippines, Turkey, Austria, Dammam -KSA

Pipe Fittings Material



Flanges Material



Other Products