PED Approved Flange

PED Approved Flange & Pipe Fittings

High quality PED Approved Pipe Elbow suppliers, PED Approved Blind Flanges Manufacturer at Best price in India

Stainless steel PED Approved Threaded Flanges manufacturers in Mumbai, Carbon Steel PED Approved Stub End Stockist in India

PED Approved FlangePED Approved Flange

Stainless steel PED Approved Threaded FlangesStainless steel PED Approved Threaded Flanges

PED Approved Forged FlangesPED Approved Forged Flanges

 

We offer PED Approved Threaded Flanges in different range and Materialt. We are one of the top notch in manufacturing, supplying and exporting of PED Approved Reducing Flanges from 1/2″ inch & 24″ inch in class 150 To Class 2500 and PED Approved Slip-On Flanges from 1/2″ inch & 24″ as per the Provisions of PED Approved. Our PED Approved Forged Flanges are widely demanded owing to their supreme quality and perfect finishing. Supplier of PED Approved Pipe Fittings & PED Approved Stub End in UAE. We are leading supplier of PED Approved Flange in Oman, Kuwait, Russia, USA, Italy, Germany, Turkey, Egypt, UK, Singapore, Australia, Thailand, Indonesia. We are stockholder of PED Approved Weld Neck Flanges at best price as we are one of the largest distributor & trader of PED Approved Socket Weld Flanges in India.

We are manufacturing PED Approved Lap Joint Flanges, PED Approved Plate Flanges & PED Approved Blind Flanges which can be machined to suit your requirements in our machine shop. The pressure range for PED Approved Orifice Flanges is from 600lb up to and including 2500lb. These PED Approved Flanges are available from CLASS 150, 300, 600, 900, 1500, 2500#, BS EN1092, Forged, Plate & Blind PN6, PN10, PN16, PN25, PN40 as per TABLE D, E, F, H.

PED Approved Flanges Specification

ItemPED Approved Flange
ASME B16.5 PED Approved Flange size range1/2″ (15 NB) to 48″ (1200NB) DN10~DN5000
PED Approved Flange Class / PressureDIN:PN6 PN10 PN16 PN25 PN40; ANSI:
Class: 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, 3000LB
DIN Standard ND-PN6, PN10, PN16, PN25, PN40, PN64 etc.
JIS: 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K
Connect Type/ Flange Face TypeRaised Face (RF), Flat Face (FF), Ring Type Joint (RTJ), Lap-Joint Face (LJF), Large Male-Female (LMF), Small Male-Female (SMF), Large Tongue & Groove, Small Tongue, Groove
Special design

As per your drawing
AS, ANSI, BS, DIN and JIS
15 NB (1/2″) to 200 NB (8″)
Equal and Reducing Configurations

EquipmentPress machine, Bending machine, Pushing Machine, electric bevelling machine Sand-blasting machine, etc
PED Approved Flange OriginWest Europe / Japan / Indian / USA / Korean
PED Approved Flange TestDirect-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector
Standard

ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.
BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange

  • B.S : BS4504, BS3293, BS1560, BS10
  • DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638
  • ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
  • ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48
  • ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
  • AS 2129: table D; table E; table H
  • The other standard:AWWA C207;EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203;UNI2276
  • American standard (ANSI)
  • German (DIN)
  • British standard (BS)
  • Any other specilised flanges
Test CertificatesEN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Production techniqueForged, Heat treated and machined
Key markets and industries for PED Approved Flange
  • Bitumen upgraders
  • Heavy oil refineries
  • Nuclear power (mostly seamless)
  • Petrochemicals and acids
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

Speficification of PED Approved Pipe Fittings

SpecificationsPED Approved Pipe Fittings
PED Approved Pipe Fittings Pipe Fittings sizeSeamless Butt Weld Fittings: 1/2″ – 10″

Welded Butt Weld Fittings: 1/2″ – 48″

PED Approved Pipe Fittings DimensionsASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10
PED Approved Pipe Fittings ThicknessSCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75
PED Approved Pipe Fittings TypesSeamless / ERW / Welded / Fabricated Pipe Fittings
PED Approved Pipe FittingsTypeDN15-DN1200
ConnectionWelding
Bending RadiusR=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom Pipe Fittings
Size Range½” NB to 24″ NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100)
PED Approved Pipe Fittings FittingsAngle : 22.5 deg, 30deg, 45 deg, 90 deg, 180 deg, 1.0D, 1.5D, 2.0D, 2.5D, 3D, 4D, 5D, 6D, 7D-40D.

Standard: ASME B16.9, ASME B16.28, ASME B16.25, MSS SP-75 DIN2605 JISB2311 JISB2312 JISB2313, BS, GB, ISO

Manufacturing processPush, Press, Forge, Cast, etc.
PED Approved Pipe Fittings Fittings Test CertificatesEN 10204/3.1B

Raw Materials Certificate

100% Radiography Test Report

Third Party Inspection Report, etc

Origin & MillsJapanese, Indian, USA, Korean, European, Ukraine, Russian
Key markets and industries for Alloy 625 Pipe Fittings
  • Bitumen upgraders.
  • Heavy oil refineries.
  • Nuclear power (mostly seamless).
  • Petrochemicals and acids.
Application
  • Fittings To Connect Pipe & Tubes in Petroleum, Power, Chemical, Construction, Gas, Metallurgy, Shipbuilding etc
  • Schedule 10 fittings are an economical alternative for lower-pressure applications.
  • Schedule 40 fittings have a thicker wall for higher-pressure applications.
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

Check PED Approved Weld Neck Flanges Price List, Alloy Steel PED Approved Lap Joint Flanges Stockholder in India.

Available material for PED Approved Flanges

Carbon SteelASTM/ASME A/SA105 A/SA105N & A/SA216-WCB, DIN 1.0402, DIN 1.0460, DIN 1.0619, Die Steel, ASTM A105 / ASME SA105, A105N, ASTM A350 LF2 / ASME SA350, High Yield CS ASTM A694 / A694 (F52 F56 F60 F65 F70 F80)
Stainless SteelASTM/ASME A/SA182 F304, F304L, F316, F316L, ASTM/ASME A/SA351 CF8, CF3, CF8M, CF3M, DIN 1.4301, DIN 1.4306, DIN 1.4401, DIN 1.4404, DIN 1.4308, DIN 1.4408, DIN 1.4306, DIN 1.4409
Alloy SteelASTM A182 / ASME SA182 F5, F9, F11, F12, F22, F91
TitaniumASTM B381 / ASME SB381, Titanium Gr. 1, Titanium Gr. 2, Titanium Gr. 4, Titanium Gr. 5, Titanium Gr. 7ASTM  R50250/GR.1 | R50400/GR.2 | R50550/GR.3 | R50700/GR.4 | GR.6 |R52400/GR.7 | R53400/GR.12 | R56320/GR.9 |R56400/GR.5
CopperT1, T2, C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10910,C10920, TP1, TP2, C10930, C11000, C11300, C11400, C11500, C11600, C12000,C12200, C12300, TU1, TU2, C12500, C14200, C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000, C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000, C44300, C44400, C44500, C60800, C63020, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, etc
Copper NickelASTM / ASME SB 61 / 62 / 151 / 152, Copper Nickel 90/10 (C70600 ), Cupro Nickel 70/30 (C71500), UNS C71640
Brass3602 / 2604 / H59 / H62 / etc.
InconelASTM B564 / ASME SB564, Inconel 600, 601, 625, 718, 783, 690, x750
HastelloyASTM B564 / ASME SB564, Hastelloy C276 (UNS N10276), C22 (UNS N06022), C4, C2000, B2, B3, X Flangess
MonelASTM B564 / ASME SB564, Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500)
Alloy 20ASTM B462 / ASME SB462, Carpenter® 20 Alloy, Alloy 20Cb-3
Aluminium5052 /6061/ 6063 / 2017 / 7075 / etc.
NickelASTM B564 / ASME SB564, Nickel 200, Nickel 201, Nickel 205, Nickel 205LC
DuplexS31803 / S32205 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61
Super DuplexS32750 / S32760 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61
IncoloyASTM B564 / ASME SB564, Incoloy 800, 800H, 800HT (UNS N08800), 825 (UNS N08825), 925 Flangess
254 SmoASTM A182 / ASME SA182, SMO 254/6Mo, UNS S31254, DIN 1.4547
NimonicNimonic 75, Nimonic 80A, Nimonic 90
Other materialTin bronze, Alumunum bronze, Lead bronze

Types of PED Approved Flanges

PED Approved Flanges
PED Approved Slip-On FlangesPED Approved Threaded Flanges
PED Approved Weld Neck FlangesPED Approved Socket Weld Flanges
PED Approved Blind FlangesPED Approved Reducing Flanges
PED Approved Lap Joint FlangesPED Approved Plate Flanges
PED Approved Orifice FlangesPED Approved Forged Flanges
PED Approved Ring Type Joint FlangesPED Approved Square Flanges

Types of PED Approved Pipe Fittings

PED Approved Pipe Fittings
PED Approved 45 DEGREE ELBOWPED Approved Eccentric Reducer
PED Approved Buttweld FittingsPED Approved Concentric Reducer
PED Approved Equal CrossPED Approved Long Radius Reducing Elbows
PED Approved Equal TeePED Approved Reducing Tee
PED Approved End CapPED Approved Stub End
PED Approved Seamless FittingPED Approved Welded Fitting
Buy from oldest PED Approved Ring Type Joint Flanges manufacturers in Mumbai. PED Approved Orifice Flanges Distributor in UAE.
Exporter of PED Approved Socket Weld Flanges, PED Approved Plate Flanges stockist in UAE, PED Approved Square Flanges Dealer
Petrochemical Commercial Company FZE (UAE)
2 Sheikh Zayed Rd – Dubai – United Arab Emirates
Zahara Petrochemicals (UAE)
Sajaa Industrial Area, – 3349 – Sharjah – United Arab Emirates
Petrochemicals (M) Sdn Bhd (Malaysia)
PLO 408, Off Jalan Pekeliling, Pasir Gudang Industrial Estate, Pasir Gudang, Johor, Malaysia
Trice Chemicals IND LLC (UAE)
UAE, Middle East. – Sharjah – United Arab Emirates
Asia Petrochemicals LLC (UAE)
al hamra Industrial area – 6 opposite ACACIA HOTEL – Ras al Khaimah – United Arab Emirates
Liwa Petroleum & Industrial Supplies LLC (UAE
Abu Dhabi – United Arab Emirates
Gem Polymer Petrochemicals LLC (UAE)
Fifty One Tower – Unit# 509 – Dubai – United Arab Emirates
Gazmin International DMCC (Dubai)
Dubai Fountain St – Dubai – United Arab Emirates
TRICE CHEMICALS MIDDLE EAST (UAE)
Sharjah – United Arab Emirates
Conmix Limited – RMC Plant DIP (Dubai)
Dubai Investments Park – Dubai – United Arab Emirates
Zettachem International (Dubai)
The Metropolis Tower – Dubai – United Arab Emirates
Gem Polymer Petrochemicals LLC (Dubai)
Fifty One Tower – Unit# 509 – Dubai – United Arab Emirates
OCRA (Singapore) Pte Limited (Singapore)
8 Temasek Boulevard #35-03 Suntec Tower 3, Singapore 038988
Abu Dhabi Fertilizer Industries Company – W L L (UAE)
16th St – Abu Dhabi – United Arab Emirates