|

IBR Approved Flange

IBR Approved Flange

High quality IBR Approved Slip-On Flanges suppliers, IBR Approved Pipe Fittings Manufacturer at Best price in India

Stainless steel IBR Approved Forged Flanges manufacturers in Mumbai, Carbon Steel IBR Approved Pipe Elbow Stockist in India

IBR Approved FlangeIBR Approved Flange

Stainless steel IBR Approved Forged FlangesStainless steel IBR Approved Forged Flanges

IBR Approved Threaded FlangesIBR Approved Threaded Flanges

 

We offer IBR Approved Pipe Fittings in different range and Materialt. We are one of the top notch in manufacturing, supplying and exporting of IBR Approved Blind Flanges from 1/2″ inch & 24″ inch in class 150 To Class 2500 and IBR Approved Flange from 1/2″ inch & 24″ as per the Provisions of IBR Approved. Our IBR Approved Reducing Flanges are widely demanded owing to their supreme quality and perfect finishing. We are leading supplier of IBR Approved Concentric Reducer in Oman, Kuwait, Russia, USA, Italy, Germany, Turkey, Egypt, UK, Singapore, Australia, Thailand, Indonesia. We are stockholder of IBR Approved Threaded Flanges at best price as we are one of the largest distributor & trader of IBR Approved Orifice Flanges in India.

IBR Approved Pipe Elbow Supplier in India. We are manufacturing IBR Approved Forged Flanges & IBR Approved Square Flanges which can be machined to suit your requirements in our machine shop. The pressure range for IBR Approved Lap Joint Flanges is from 600lb up to and including 2500lb. These IBR Approved Flanges are available from CLASS 150, 300, 600, 900, 1500, 2500#, BS EN1092, Forged, Plate & Blind PN6, PN10, PN16, PN25, PN40 as per TABLE D, E, F, H.

IBR Approved Flanges Specification

Item IBR Approved Flange
ASME B16.5 IBR Approved Flange size range 1/2″ (15 NB) to 48″ (1200NB) DN10~DN5000
IBR Approved Flange Class / Pressure DIN:PN6 PN10 PN16 PN25 PN40; ANSI:
Class: 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, 3000LB
DIN Standard ND-PN6, PN10, PN16, PN25, PN40, PN64 etc.
JIS: 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K
Connect Type/ Flange Face Type Raised Face (RF), Flat Face (FF), Ring Type Joint (RTJ), Lap-Joint Face (LJF), Large Male-Female (LMF), Small Male-Female (SMF), Large Tongue & Groove, Small Tongue, Groove
Special design

As per your drawing
AS, ANSI, BS, DIN and JIS
15 NB (1/2″) to 200 NB (8″)
Equal and Reducing Configurations
Equipment Press machine, Bending machine, Pushing Machine, electric bevelling machine Sand-blasting machine, etc
IBR Approved Flange Origin West Europe / Japan / Indian / USA / Korean
IBR Approved Flange Test Direct-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector
Standard

ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.
BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange

  • B.S : BS4504, BS3293, BS1560, BS10
  • DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638
  • ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
  • ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48
  • ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
  • AS 2129: table D; table E; table H
  • The other standard:AWWA C207;EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203;UNI2276
  • American standard (ANSI)
  • German (DIN)
  • British standard (BS)
  • Any other specilised flanges
Test Certificates EN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Production technique Forged, Heat treated and machined
Key markets and industries for IBR Approved Flange
  • Bitumen upgraders
  • Heavy oil refineries
  • Nuclear power (mostly seamless)
  • Petrochemicals and acids
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

Speficification of IBR Approved Pipe Fittings

Specifications IBR Approved Pipe Fittings
IBR Approved Pipe Fittings Pipe Fittings size Seamless Butt Weld Fittings: 1/2″ – 10″

Welded Butt Weld Fittings: 1/2″ – 48″
IBR Approved Pipe Fittings Dimensions ASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10
IBR Approved Pipe Fittings Thickness SCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75
IBR Approved Pipe Fittings Types Seamless / ERW / Welded / Fabricated Pipe Fittings
IBR Approved Pipe FittingsType DN15-DN1200
Connection Welding
Bending Radius R=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom Pipe Fittings
Size Range ½” NB to 24″ NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100)
IBR Approved Pipe Fittings Fittings Angle : 22.5 deg, 30deg, 45 deg, 90 deg, 180 deg, 1.0D, 1.5D, 2.0D, 2.5D, 3D, 4D, 5D, 6D, 7D-40D.

Standard: ASME B16.9, ASME B16.28, ASME B16.25, MSS SP-75 DIN2605 JISB2311 JISB2312 JISB2313, BS, GB, ISO
Manufacturing process Push, Press, Forge, Cast, etc.
IBR Approved Pipe Fittings Fittings Test Certificates EN 10204/3.1B

Raw Materials Certificate

100% Radiography Test Report

Third Party Inspection Report, etc
Origin & Mills Japanese, Indian, USA, Korean, European, Ukraine, Russian
Key markets and industries for Alloy 625 Pipe Fittings
  • Bitumen upgraders.
  • Heavy oil refineries.
  • Nuclear power (mostly seamless).
  • Petrochemicals and acids.
Application
  • Fittings To Connect Pipe & Tubes in Petroleum, Power, Chemical, Construction, Gas, Metallurgy, Shipbuilding etc
  • Schedule 10 fittings are an economical alternative for lower-pressure applications.
  • Schedule 40 fittings have a thicker wall for higher-pressure applications.
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

Check IBR Approved Weld Neck Flanges Price List, Alloy Steel IBR Approved Socket Weld Flanges Stockholder in India.

Available material for IBR Approved Flanges

Carbon Steel ASTM/ASME A/SA105 A/SA105N & A/SA216-WCB, DIN 1.0402, DIN 1.0460, DIN 1.0619, Die Steel, ASTM A105 / ASME SA105, A105N, ASTM A350 LF2 / ASME SA350, High Yield CS ASTM A694 / A694 (F52 F56 F60 F65 F70 F80)
Stainless Steel ASTM/ASME A/SA182 F304, F304L, F316, F316L, ASTM/ASME A/SA351 CF8, CF3, CF8M, CF3M, DIN 1.4301, DIN 1.4306, DIN 1.4401, DIN 1.4404, DIN 1.4308, DIN 1.4408, DIN 1.4306, DIN 1.4409
Alloy Steel ASTM A182 / ASME SA182 F5, F9, F11, F12, F22, F91
Titanium ASTM B381 / ASME SB381, Titanium Gr. 1, Titanium Gr. 2, Titanium Gr. 4, Titanium Gr. 5, Titanium Gr. 7ASTM  R50250/GR.1 | R50400/GR.2 | R50550/GR.3 | R50700/GR.4 | GR.6 |R52400/GR.7 | R53400/GR.12 | R56320/GR.9 |R56400/GR.5
Copper T1, T2, C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10910,C10920, TP1, TP2, C10930, C11000, C11300, C11400, C11500, C11600, C12000,C12200, C12300, TU1, TU2, C12500, C14200, C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000, C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000, C44300, C44400, C44500, C60800, C63020, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, etc
Copper Nickel ASTM / ASME SB 61 / 62 / 151 / 152, Copper Nickel 90/10 (C70600 ), Cupro Nickel 70/30 (C71500), UNS C71640
Brass 3602 / 2604 / H59 / H62 / etc.
Inconel ASTM B564 / ASME SB564, Inconel 600, 601, 625, 718, 783, 690, x750
Hastelloy ASTM B564 / ASME SB564, Hastelloy C276 (UNS N10276), C22 (UNS N06022), C4, C2000, B2, B3, X Flangess
Monel ASTM B564 / ASME SB564, Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500)
Alloy 20 ASTM B462 / ASME SB462, Carpenter® 20 Alloy, Alloy 20Cb-3
Aluminium 5052 /6061/ 6063 / 2017 / 7075 / etc.
Nickel ASTM B564 / ASME SB564, Nickel 200, Nickel 201, Nickel 205, Nickel 205LC
Duplex S31803 / S32205 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61
Super Duplex S32750 / S32760 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61
Incoloy ASTM B564 / ASME SB564, Incoloy 800, 800H, 800HT (UNS N08800), 825 (UNS N08825), 925 Flangess
254 Smo ASTM A182 / ASME SA182, SMO 254/6Mo, UNS S31254, DIN 1.4547
Nimonic Nimonic 75, Nimonic 80A, Nimonic 90
Other material Tin bronze, Alumunum bronze, Lead bronze

Types of IBR Approved Flanges

IBR Approved Flanges
IBR Approved Slip-On Flanges IBR Approved Threaded Flanges
IBR Approved Weld Neck Flanges IBR Approved Socket Weld Flanges
IBR Approved Blind Flanges IBR Approved Reducing Flanges
IBR Approved Lap Joint Flanges IBR Approved Plate Flanges
IBR Approved Orifice Flanges IBR Approved Forged Flanges
IBR Approved Ring Type Joint Flanges IBR Approved Square Flanges

Types of IBR Approved Pipe Fittings

IBR Approved Pipe Fittings
IBR Approved 45 DEGREE ELBOW IBR Approved Eccentric Reducer
IBR Approved Buttweld Fittings IBR Approved Concentric Reducer
IBR Approved Equal Cross IBR Approved Long Radius Reducing Elbows
IBR Approved Equal Tee IBR Approved Reducing Tee
IBR Approved End Cap IBR Approved Stub End
IBR Approved Seamless Fitting IBR Approved Welded Fitting
Buy from oldest IBR Approved Blind Flanges manufacturers in Mumbai. IBR Approved Reducing Flanges Distributor in UAE.
Exporter of IBR Approved Lap Joint Flanges, IBR Approved Plate Flanges stockist in UAE, IBR Approved Orifice Flanges Dealer
Petrochemical Commercial Company FZE (UAE)
2 Sheikh Zayed Rd – Dubai – United Arab Emirates		 Zahara Petrochemicals (UAE)
Sajaa Industrial Area, – 3349 – Sharjah – United Arab Emirates
Petrochemicals (M) Sdn Bhd (Malaysia)
PLO 408, Off Jalan Pekeliling, Pasir Gudang Industrial Estate, Pasir Gudang, Johor, Malaysia		 Trice Chemicals IND LLC (UAE)
UAE, Middle East. – Sharjah – United Arab Emirates
Asia Petrochemicals LLC (UAE)
al hamra Industrial area – 6 opposite ACACIA HOTEL – Ras al Khaimah – United Arab Emirates		 Liwa Petroleum & Industrial Supplies LLC (UAE
Abu Dhabi – United Arab Emirates
Gem Polymer Petrochemicals LLC (UAE)
Fifty One Tower – Unit# 509 – Dubai – United Arab Emirates		 Gazmin International DMCC (Dubai)
Dubai Fountain St – Dubai – United Arab Emirates
TRICE CHEMICALS MIDDLE EAST (UAE)
Sharjah – United Arab Emirates		 Conmix Limited – RMC Plant DIP (Dubai)
Dubai Investments Park – Dubai – United Arab Emirates
Zettachem International (Dubai)
The Metropolis Tower – Dubai – United Arab Emirates		 Gem Polymer Petrochemicals LLC (Dubai)
Fifty One Tower – Unit# 509 – Dubai – United Arab Emirates
OCRA (Singapore) Pte Limited (Singapore)
8 Temasek Boulevard #35-03 Suntec Tower 3, Singapore 038988		 Abu Dhabi Fertilizer Industries Company – W L L (UAE)
16th St – Abu Dhabi – United Arab Emirates