EIL Approved Flange

EIL Approved Flange & Pipe Fittings

High quality EIL Approved Weld Neck Flanges suppliers, EIL Approved Elbow Manufacturer at Best price in India

Stainless steel EIL Approved Ring Type Joint Flanges manufacturers in Mumbai, Carbon Steel EIL Approved Concentric Reducer Stockist in India

EIL Approved FlangeEIL Approved Flange

Stainless steel EIL Approved Ring Type Joint FlangesStainless steel EIL Approved Ring Type Joint Flanges

EIL Approved Weld Neck FlangesEIL Approved Weld Neck Flanges

 

We are one of the top notch in manufacturing, supplying and exporting of EIL Approved Flange from 1/2″ inch & 24″ inch in class 150 To Class 2500 and EIL Approved Socket Weld Flanges from 1/2″ inch & 24″ as per the Provisions of EIL Approved. We are leading supplier of EIL Approved Weld Neck Flanges in Oman, Kuwait, Russia, USA, Italy, Germany, Turkey, Egypt, UK, Singapore, Australia, Thailand, Indonesia. We are manufacturing EIL Approved Forged Flanges, EIL Approved Ring Type Joint Flanges & EIL Approved Lap Joint Flanges which can be machined to suit your requirements in our machine shop. We offer EIL Approved Blind Flanges in different range and Materialt. Our EIL Approved Slip-On Flanges are widely demanded owing to their supreme quality and perfect finishing. Leadin Manufacturer of EIL approved Pipe Fittings in India

The pressure range for EIL Approved Reducing Flanges is from 600lb up to and including 2500lb. These EIL Approved Flanges are available from CLASS 150, 300, 600, 900, 1500, 2500#, BS EN1092, Forged, Plate & Blind PN6, PN10, PN16, PN25, PN40 as per TABLE D, E, F, H. We are stockholder of EIL Approved Plate Flanges at best price as we are one of the largest distributor & trader of EIL Approved Orifice Flanges in India.

EIL Approved Flanges Specification

ItemEIL Approved Flange
ASME B16.5 EIL Approved Flange size range1/2″ (15 NB) to 48″ (1200NB) DN10~DN5000
EIL Approved Flange Class / PressureDIN:PN6 PN10 PN16 PN25 PN40; ANSI:
Class: 150 LBS, 300 LBS, 600 LBS, 900 LBS, 1500 LBS, 2500 LBS, 3000LB
DIN Standard ND-PN6, PN10, PN16, PN25, PN40, PN64 etc.
JIS: 5K, 10 K, 16 K 20 K, 30 K, 40 K, 63 K
Connect Type/ Flange Face TypeRaised Face (RF), Flat Face (FF), Ring Type Joint (RTJ), Lap-Joint Face (LJF), Large Male-Female (LMF), Small Male-Female (SMF), Large Tongue & Groove, Small Tongue, Groove
Special design

As per your drawing
AS, ANSI, BS, DIN and JIS
15 NB (1/2″) to 200 NB (8″)
Equal and Reducing Configurations

EquipmentPress machine, Bending machine, Pushing Machine, electric bevelling machine Sand-blasting machine, etc
EIL Approved Flange OriginWest Europe / Japan / Indian / USA / Korean
EIL Approved Flange TestDirect-reading Spectrograph, Hydrostatic testing machine, X-ray detector, UI trasonic flaw detector, Magnetic particle detector
Standard

ANSI DIN, GOST, JIS, UNI, BS, AS2129, AWWA, EN, SABS, NFE etc.
BS Flange, EN Flange, API 6A Flange, ANSI Flange, ASME Flange, DIN Flange, EN1092-1 Flange, UNI Flange, JIS/KS Flange, BS4504 Flange, GB Flange, AWWA C207 Flange, GOST Flange, PSI Flange

  • B.S : BS4504, BS3293, BS1560, BS10
  • DIN : DIN2527, DIN2566, DIN2573, DIN2576, DIN2641, DIN2642, DIN2655, DIN2656, DIN2627, DIN2628, DIN2629, DIN 2631, DIN2632, DIN2633, DIN2634, DIN2635, DIN2636, DIN2637, DIN2638
  • ANSI B16.5, ANSI B16.47 Series A & B, MSS SP44, ASA, API-605, AWWA, Custom Drawings
  • ANSI : ANSI B16.5, ANSI B16.47(API605), MSS SP44, ANSI B16.36, ANSI B16.48
  • ANSI B16.5, ANSI B16.47, MSS SP44, ANSI B16.36, ANSI B16.48
  • AS 2129: table D; table E; table H
  • The other standard:AWWA C207;EN1092-1, GOST12820, JIS B2220; KS B1503, SABS1123; NFE29203;UNI2276
  • American standard (ANSI)
  • German (DIN)
  • British standard (BS)
  • Any other specilised flanges
Test CertificatesEN 10204/3.1B
Raw Materials Certificate
100% Radiography Test Report
Third Party Inspection Report, etc
Production techniqueForged, Heat treated and machined
Key markets and industries for EIL Approved Flange
  • Bitumen upgraders
  • Heavy oil refineries
  • Nuclear power (mostly seamless)
  • Petrochemicals and acids
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

Speficification of EIL Approved Pipe Fittings

SpecificationsEIL Approved Pipe Fittings
EIL Approved Pipe Fittings Pipe Fittings sizeSeamless Butt Weld Fittings: 1/2″ – 10″

Welded Butt Weld Fittings: 1/2″ – 48″

EIL Approved Pipe Fittings DimensionsASME/ANSI B16.9, ASME B16.28, MSS-SP-43, BS4504, BS4504, BS1560, BS10
EIL Approved Pipe Fittings ThicknessSCH10, SCH20, SCH30, STD SCH40, SCH60, XS, SCH 80, SCH 100, SCH 120, SCH 140, SCH 160, XXS available with NACE MR 01-75
EIL Approved Pipe Fittings TypesSeamless / ERW / Welded / Fabricated Pipe Fittings
EIL Approved Pipe FittingsTypeDN15-DN1200
ConnectionWelding
Bending RadiusR=1D, 2D, 3D, 5D, 6D, 8D, 10D or Custom Pipe Fittings
Size Range½” NB to 24″ NB in Sch 10s, 40s, 80s, 160s, XXS. (DN6~DN100)
EIL Approved Pipe Fittings FittingsAngle : 22.5 deg, 30deg, 45 deg, 90 deg, 180 deg, 1.0D, 1.5D, 2.0D, 2.5D, 3D, 4D, 5D, 6D, 7D-40D.

Standard: ASME B16.9, ASME B16.28, ASME B16.25, MSS SP-75 DIN2605 JISB2311 JISB2312 JISB2313, BS, GB, ISO

Manufacturing processPush, Press, Forge, Cast, etc.
EIL Approved Pipe Fittings Fittings Test CertificatesEN 10204/3.1B

Raw Materials Certificate

100% Radiography Test Report

Third Party Inspection Report, etc

Origin & MillsJapanese, Indian, USA, Korean, European, Ukraine, Russian
Key markets and industries for Alloy 625 Pipe Fittings
  • Bitumen upgraders.
  • Heavy oil refineries.
  • Nuclear power (mostly seamless).
  • Petrochemicals and acids.
Application
  • Fittings To Connect Pipe & Tubes in Petroleum, Power, Chemical, Construction, Gas, Metallurgy, Shipbuilding etc
  • Schedule 10 fittings are an economical alternative for lower-pressure applications.
  • Schedule 40 fittings have a thicker wall for higher-pressure applications.
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2, Test Certificates certifying NACE MR0103, NACE MR0175

Check EIL Approved Blind Flanges Price List, Alloy Steel EIL Approved Plate Flanges Stockholder in India.

Available material for EIL Approved Flanges

Carbon SteelASTM/ASME A/SA105 A/SA105N & A/SA216-WCB, DIN 1.0402, DIN 1.0460, DIN 1.0619, Die Steel, ASTM A105 / ASME SA105, A105N, ASTM A350 LF2 / ASME SA350, High Yield CS ASTM A694 / A694 (F52 F56 F60 F65 F70 F80)
Stainless SteelASTM/ASME A/SA182 F304, F304L, F316, F316L, ASTM/ASME A/SA351 CF8, CF3, CF8M, CF3M, DIN 1.4301, DIN 1.4306, DIN 1.4401, DIN 1.4404, DIN 1.4308, DIN 1.4408, DIN 1.4306, DIN 1.4409
Alloy SteelASTM A182 / ASME SA182 F5, F9, F11, F12, F22, F91
TitaniumASTM B381 / ASME SB381, Titanium Gr. 1, Titanium Gr. 2, Titanium Gr. 4, Titanium Gr. 5, Titanium Gr. 7ASTM  R50250/GR.1 | R50400/GR.2 | R50550/GR.3 | R50700/GR.4 | GR.6 |R52400/GR.7 | R53400/GR.12 | R56320/GR.9 |R56400/GR.5
CopperT1, T2, C10100, C10200, C10300, C10400, C10500, C10700, C10800, C10910,C10920, TP1, TP2, C10930, C11000, C11300, C11400, C11500, C11600, C12000,C12200, C12300, TU1, TU2, C12500, C14200, C14420, C14500, C14510, C14520, C14530, C17200, C19200, C21000, C23000, C26000, C27000, C27400, C28000, C33000, C33200, C37000, C44300, C44400, C44500, C60800, C63020, C68700, C70400, C70600, C70620, C71000, C71500, C71520, C71640, etc
Copper NickelASTM / ASME SB 61 / 62 / 151 / 152, Copper Nickel 90/10 (C70600 ), Cupro Nickel 70/30 (C71500), UNS C71640
Brass3602 / 2604 / H59 / H62 / etc.
InconelASTM B564 / ASME SB564, Inconel 600, 601, 625, 718, 783, 690, x750
HastelloyASTM B564 / ASME SB564, Hastelloy C276 (UNS N10276), C22 (UNS N06022), C4, C2000, B2, B3, X Flangess
MonelASTM B564 / ASME SB564, Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500)
Alloy 20ASTM B462 / ASME SB462, Carpenter® 20 Alloy, Alloy 20Cb-3
Aluminium5052 /6061/ 6063 / 2017 / 7075 / etc.
NickelASTM B564 / ASME SB564, Nickel 200, Nickel 201, Nickel 205, Nickel 205LC
DuplexS31803 / S32205 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61
Super DuplexS32750 / S32760 A182 Gr F51 / F52 / F53 / F54 / F55 / F57 / F59 / F60 / F61
IncoloyASTM B564 / ASME SB564, Incoloy 800, 800H, 800HT (UNS N08800), 825 (UNS N08825), 925 Flangess
254 SmoASTM A182 / ASME SA182, SMO 254/6Mo, UNS S31254, DIN 1.4547
NimonicNimonic 75, Nimonic 80A, Nimonic 90
Other materialTin bronze, Alumunum bronze, Lead bronze

Types of EIL Approved Flanges

EIL Approved Flanges
EIL Approved Slip-On FlangesEIL Approved Threaded Flanges
EIL Approved Weld Neck FlangesEIL Approved Socket Weld Flanges
EIL Approved Blind FlangesEIL Approved Reducing Flanges
EIL Approved Lap Joint FlangesEIL Approved Plate Flanges
EIL Approved Orifice FlangesEIL Approved Forged Flanges
EIL Approved Ring Type Joint FlangesEIL Approved Square Flanges

Types of EIL Approved Pipe Fittings

EIL Approved Pipe Fittings
EIL Approved 45 DEGREE ELBOWEIL Approved Eccentric Reducer
EIL Approved Buttweld FittingsEIL Approved Concentric Reducer
EIL Approved Equal CrossEIL Approved Long Radius Reducing Elbows
EIL Approved Equal TeeEIL Approved Reducing Tee
EIL Approved End CapEIL Approved Stub End
EIL Approved Seamless FittingEIL Approved Welded Fitting
Buy from oldest EIL Approved Orifice Flanges manufacturers in Mumbai. EIL Approved Slip-On Flanges Distributor in UAE.
Exporter of EIL Approved Square Flanges, EIL Approved Lap Joint Flanges stockist in UAE, EIL Approved Forged Flanges Dealer
Petrochemical Commercial Company FZE (UAE)
2 Sheikh Zayed Rd – Dubai – United Arab Emirates
Zahara Petrochemicals (UAE)
Sajaa Industrial Area, – 3349 – Sharjah – United Arab Emirates
Petrochemicals (M) Sdn Bhd (Malaysia)
PLO 408, Off Jalan Pekeliling, Pasir Gudang Industrial Estate, Pasir Gudang, Johor, Malaysia
Trice Chemicals IND LLC (UAE)
UAE, Middle East. – Sharjah – United Arab Emirates
Asia Petrochemicals LLC (UAE)
al hamra Industrial area – 6 opposite ACACIA HOTEL – Ras al Khaimah – United Arab Emirates
Liwa Petroleum & Industrial Supplies LLC (UAE
Abu Dhabi – United Arab Emirates
Gem Polymer Petrochemicals LLC (UAE)
Fifty One Tower – Unit# 509 – Dubai – United Arab Emirates
Gazmin International DMCC (Dubai)
Dubai Fountain St – Dubai – United Arab Emirates
TRICE CHEMICALS MIDDLE EAST (UAE)
Sharjah – United Arab Emirates
Conmix Limited – RMC Plant DIP (Dubai)
Dubai Investments Park – Dubai – United Arab Emirates
Zettachem International (Dubai)
The Metropolis Tower – Dubai – United Arab Emirates
Gem Polymer Petrochemicals LLC (Dubai)
Fifty One Tower – Unit# 509 – Dubai – United Arab Emirates
OCRA (Singapore) Pte Limited (Singapore)
8 Temasek Boulevard #35-03 Suntec Tower 3, Singapore 038988
Abu Dhabi Fertilizer Industries Company – W L L (UAE)
16th St – Abu Dhabi – United Arab Emirates